Situation
AC gen-sets are typically used when telecom towers are connected to the grid, supporting the mains system as standby power. Although almost all base tranceiver stations (BTS) would benefit from a backup gen-set, an AC system would be particularly advantageous in a region with an unreliable grid infrastrcuture.
ComAp Solution
InteliNano NT AMF continuously monitors the mains supply, and in the case of a failure, will automatically start an engine to switch the load to the standby gen-set. The generator is protected by built in over/under voltage and frequency protection systems. The controller communicates with the engine management unit via a CAN J1939 bus and shows engine values and alarms on a graphical LCD screen.
Description:
- Stand-by gen-set with electronic engine. InteliNano NT AMF continuously monitors a mains supply and automatically starts an engine and switches load to a standby generator set in case of failure.
- The generator is protected by built in over/under voltage and frequency protection systems.
- The controller communicates with the engine management unit via a CAN J1939 bus and shows engine values and alarms on a graphical LCD screen.
Scope of supply:
